Garrett Pro-Pointer

Professional pinpointer loaded with features only Garrett can offer.

Tip and side scan, audible and vibrating alarms, microprocessor circuitry.
Water resistant, LED light, automatic tuning, sifting blade for scraping soil.
9V battery included.
Alarms increase with intensity as you close in on the target, and it has nearly twice the depth of competitors' units.
Accurate recovery, even in mineralized and salt water saturated environments.

Forget those cheap pinpointers you have seen in the past!

MADE IN AMERICA

The large 2 inch detection tip means deeper detection depths and more sensitivity to large objects. No push button switches. Instead it uses our unique tilt on & off design.

Pulse Induction (PI)
Tilt on & off
Communicates with vibration and light
Automatic Calibration
Low battery alert
Waterproof - Submersible to 100 feet (30 meters)

The unique sealed design is waterproof to a depth of 100 feet and the self calibrating microprocessor controlled circuitry requires no adjustments of any kind.

The Vibra-Quatic incorporates Pulse Induction (PI) technology. This allows hunting in any environment including grass, mud, dirt, sand, black sand, and fresh or salt water.

Features:

• Also includes a removable wrist strap with ring for added security.
• Communicates with vibration & light - When a target is located the Vibra-Quatic 2 signals with pulses of vibration and flashes of bright blue light.
• Pulse Induction (PI) - This technology allows hunting at the beach in salt water or in any type of soil, including black sand.
• Detection depth stability - New advanced circuitry maintains the unit's detection distance throughout the life of the battery.
• True Target Direction - The Vibra-Quatic 2 detects at the tip only, not along the shaft, enabling precision target pinpointing.
• Target distancing - The pulses of vibration and light will continue to increase in quantity as the probe tip gets closer to the target.
• Automatic tuning - The state of the art microprocessor controlled design requires no adjustments of any kind.
• Tilt On/Off - No push button switches. The Vibra-Quatic 2 uses a tilt on/off system that eliminates fragile external switches.
• Waterproof - Unique sealed design can be used in almost any environment including fresh or salt water to depth of 100 feet. This makes the Vibra-Quatic 2 an ideal tool for divers.
• Low battery indicator - Built in low battery sensor alerts you when the battery is low and needs replacing.
• Easy battery installation - The standard nine-volt battery is quickly changed without tools. Simply rotate the rear knob and pull out the compression seal to access the battery compartment.
• Solid construction - The Vibra-Quatic's rugged sealed construction and stainless steel hardware are built to last.
• Belt ring & wrist strap - Includes a belt ring to attach to any common belt clip as well as a wrist strap for added security.

Specifications:

• Manufacturer: Treasure Products, Inc.
• Model: Vibra-Quatic 2
• Detection Type: Pulse Induction
• Search Mode: All metal
• Communication: Vibration and light
• Tuning: Automatic
• Overall Length: 15 inches (38 cm)
• Tip Diameter: 2 inches (5 cm)
• Weight: 12 oz (375 grams)
• Power: One standard 9v battery
• Waterproof: Submersible to 100 feet (30 meters)
• Wrist Strap: Included
• 9v Battery: Included
• Warranty: 1 year

Package contents:

• (1) Vibra-Quatic 2 Pinpointer Metal Detector
• (1) Removable Wrist strap
• (1) 9v Alkaline Battery
• Instruction Manual & Warranty

Vibra-Tector 730 ™ Mini Metal Detector

The Vibra-Tector 730 is a state of the art handheld metal detector that communicates with pulses of vibration and light, incorporates Pulse Induction (PI) technology and is waterproof to a depth of 30 feet.

The self-calibrating microprocessor controlled circuitry requires no adjustments. The unique sealed design allows detecting in any environment including grass, mud, dirt, sand, black sand, or even in fresh or salt water.

• Communicates with vibration & light
• Pulse Induction
• Tilt on & off
• Requires no adjustments
• Waterproof to a depth of 30 feet
• Low battery indicator
• Belt ring and wrist strap included
• Battery included

• Communicates with vibration & light - When a target is located the Vibra-Tector 730 signals with pulses of vibration and flashes of bright light from a white L.E.D.

• Pulse Induction (PI) - This technology allows hunting at the beach in salt water or in any type of soil, including black sand.

• Detection depth stability - New advanced circuitry maintains the unit’s detection distance throughout the life of the battery.

• Target distancing - The pulses of vibration and light will continue to increase in quantity as the coil gets closer to the target.

• Automatic tuning - The state of the art microprocessor controlled design requires no adjustments of any kind.

• Tilt On/Off - The Vibra-Tector 730 uses a tilt on/off system that eliminates the need for fragile push button switches.

• Waterproof - Unique sealed design can be used in almost any environment including fresh or salt water to a depth of 30 feet. This makes the Vibra-Tector an ideal tool for divers or the beach.

• Low battery indicator - Built in low battery sensor alerts you when the battery is low and needs replacing.

• Easy battery installation - The standard nine-volt battery is quickly changed without tools. Simply rotate the rear knob and pull out the compression seal to access the battery compartment.

• Compact design - Because of its compact 4 inch coil, and small overall size, the Vibra-Tector 730 is easy to carry and can fit in almost any small suitcase or backpack for travel.

• Solid construction - The Vibra-Tector’s rugged sealed construction and stainless steel hardware are built to last.

• Belt ring & wrist strap - Includes a belt ring to attach to any common belt clip as well as a wrist strap for added security.

• Specifications
• Length: 16"
• Coil dia.: 4"
• Weight: 14 oz.
• Power: 9V battery
• Warranty: 1 year
• Battery: included
• Wrist strap: included

Made in the USA

Vibra-Probe 570

The Vibra-Probe 570 pinpointer metal detector is a miniature version of a primary detector. It communicates through vibration, incorporates pulse induction (PI) technology, is waterproof to a depth of 30 feet and comes with the belt mountable holster.

The Vibra-Probe 570 is fully automatic. The self-calibrating microprocessor controlled circuitry requires no adjustments and utilizes automatic on and off. The modern electronics and simple to use design makes locating elusive targets easy in any environment including grass, mud, dirt, sand, black sand, or even in fresh or salt water.

• Communicates with vibration
• Pulse induction
• Automatic on & off
• Requires no adjustments
• Waterproof to a depth of 30 feet
• Low battery indicator
• Holster included
• Battery included

• Communicates with vibration - The Vibra-Probe 570 signals with pulses of vibration when a target is located. It replaces the need for buzzers that can be difficult to hear, especially when wearing headphones from a primary detector.

• Pulse induction (PI) - This technology allows hunting at the beach in salt water or in any type of soil, including black sand.

• Detection depth stability - New advanced circuitry maintains the unit’s detection distance throughout the life of the battery.

• True target direction - The Vibra-Probe 570 detects at the tip only, not along the shaft, enabling precision target pinpointing.

• Target distancing - The pulses of vibration will continue to increase in quantity as the probe tip gets closer to the target.

• Automatic tuning - The state of the art microprocessor controlled design requires no adjustments of any kind. • Automatic on/off - No push button switches. The Vibra- Probe 570 automatically turns on when pointed upward and automatically turns off one minute after last pulse.

• Waterproof - unique sealed design allows the Vibra-Probe to be used in the rain, mud, or under water to a depth of 30 feet.

• Low battery indicator - Built in low battery sensor alerts you when the battery is low and needs replacing. • Easy battery installation - The standard nine-volt battery is quickly changed without tools. Simply rotate the rear knob and pull out the compression seal to access the battery compartment.

• Solid construction - The Vibra-Probe’s rugged sealed construction and stainless steel hardware are built to last.

• Holster - Includes belt mountable holster for easy carrying.

• Specifications:
• Detection Type Search Mode • Pulse Induction • All metal
• Overall Length • 14 inches
• Weight Power • 0.5 lbs.
• Warranty • 1 year
• Battery • Standard 9 volt battery • Included

Made in the USA

Treasure Mate Electronic Probe

Operating frequency: 16.5khz
Coil: 3/8" coax
Signal: (1)LED and speaker (2) LED and vibrator
Settings: Ground Balance and Tuning Controls
Battery: 9 volt
Battery life: 30~50 hours
Weight: 6 ounces
Temperature range: 30~100 degrees F
Humidity: 0~70%
Mode: all metal, variable range tunning
Warranty: limited lifetime warranty

Controls: Pulse frequency, threshold, headphone volume. Connectors: Left cable for headphone connection to your detector. Right cable for probe searchcoil or optional 8" or 11" DetectorPro PI searchcoils.	Now you can have a waterproof probe for underwater searches in your favorite dive spots! The underwater Uniprobe is made up of our Headhunter PI's main electronics in the headset and adding the probe. The Probe can be easily upgraded to a regular PI metal detector by adding rods and a coil. This probe can be used underwater in places that you can not get near with a conventional searchcoil — around rocks, crevices or any other tight spot. Optional 8 or 11-inch Pulse searchcoils available for underwater Uniprobe. Add our rod assembly and you have a complete functioning Headhunter PULSE metal detector!

Technical Specifications:

• Operating search frequency: pulse induction.
• Searchcoil: 8" x 5/8" diameter probe.
• Headphone transducers: speakers designed for maximum sensitivity efficiency, durability and signal quality.
• Audio frequency: pulse VCO
• Headphone earcups: heavy-duty polymer full ear surround; extra comfortable soft cushions, ambient noise blocking up to 23 decibels, heavy-duty underwater connector.
• Headphone frame: adjustable padded headband, no screws, no wire frame, no rust, compact carry foldable design.
• Controls: full-range continuous adjust on/off volume, threshold and frequency.
• Search mode: threshold search, slow-motion.
• Operating environments: waterproof for salt & fresh underwater use.
• Cables: heavy-duty coil cord for probe with high-quality underwater connector.
• Rods: optional for conversion to pulse detector
• Searchcoils: optional DetectorPro 8" or 11" PI
• Breakdown: compact fold and carry.
• Battery: (2) 9-volt alkaline batteries (recommended).
• Battery life: dependent on the on/off cycling during use, rated currently up to 10 hours (alkaline) continuous "on" use.
• Applications: jewelry, relic, wreck diving, gold sniping and coin hunting.
• Warranty: 2 years.
• NOTE: specifications and features subject to change without notice.
  

Detector Pro UNIPROBE

You are looking at a value-added industry first from DetectorPro! The first compact all-in-one probe/headphone/pulse inductance metal detector in the world famous DetectorPro design. UniProbe is a new high-powered pulse inductance probe that can be switched on or off during hunting and retrieval with your metal detector... Or it can be used just as a set of high-quality detector headphones... Or with an optional PI searchcoil and rods, it can be turned into a complete PI metal detector! Not only does this probe contain today's most innovative Pulse Inductance electronics, it is the first probe that has all the electronics built into the headphones. All of this is possible because of our innovative microcircuitry and packaging. The UniProbe has been engineered to perform in all ground minerals and on both salt and fresh water beaches too with up to 5-6" depth on coins in the retrieval hole. UniProbe is a true universal application probe/ metal detector and will open up a whole new world of accurate retrieval for you. Too many valuable coins, relics and jewelry are damaged everyday by the detectorist's inability to accurately pinpoint with large searchcoils. Isn't it about time you stopped damaging your treasures?

High-quality removable 1/4" coiled headphone cable with molded plug and locking connector included.

Technical specifications:

• Operating search frequency: pulse induction.
• Searchcoil: 8" x 5/8" diameter probe.
• Probe Depth: Up to 5-6" deep on coins in the hole.
• Headphone transducers: speakers designed for maximum sensitivity efficiency, durability and signal quality.
• Audio frequency: pulse VCO
• Headphone earcups: heavy-duty polymer full ear surround; extra comfortable soft cushions, ambient noise blocking up to 23 decibels.
• Headphone frame: adjustable padded headband, no screws, no wire frame, no rust, compact carry foldable design.
• Controls: full range "stay put" volume with segmented "click" positioning; continuous adjust threshold and frequency.
• Switches: all detector compatibility; Probe "on/off"
• Search mode: threshold search, slow-motion.
• Operating environments: 8" probe is waterproof for land, salt & fresh water beach use; headphones are not waterproof.
• Cables: 1/4" heavy-duty removable coil cords for probe and headphone with high-quality connectors.
• Rods: optional for conversion to pulse detector
• Searchcoils: optional DetectorPro 8" or 11" PI
• Breakdown: compact fold and carry, removable cords with high-quality connectors.
• Battery: (1) 9-volt alkaline battery (supplied).
• Battery life: dependent on the on/off cycling during use, rated currently up to 12 hours (alkaline) continuous "on" use.
• Applications: jewelry, relic, and coin hunting.
• Warranty: 2 years.

NOTE: specifications and features subject to change without notice.