GROUND TRAC

In metal detecting, it is very important that the machine is calibrated for the particular soil conditions that you are hunting. This allows the detector to discriminate the difference between the soil and a target. Bounty Hunter metal detectors come with the Ground Trac®. This feature automatically balances the machine to the soil conditions.

DIGITAL CIRCUITRY

ZILOG Z-86 Computer Circuit which combines with Bounty Hunter's Patented Technology.

MANUAL GROUND BALANCE

This featuer allows the detectorist to set the balance for the mineralization of the soil. This allows flexibility between soil types. Great for competitions.

LCD DISPLAY

The LCD target readout will display the probable type of metal being targeted and what denomination of coins are detected. The denomination of coins are also symbols for many other types of metal that are in the same detection range.

3 MODE DISCRIMINATION

This is the three modes in which some detectors operation. 1) Motion all metal mode is when it is necessary to swing the coil. 2) No-Motion all metal mode is when no movement is required to detect a target.
3) The Motion all metal mode is the same mode as the motion all metal discriminate mode, but with the discrimination turned all the way down (off). It allows the user to hunt with three tone audio target ID and "see" everything, or almost everything.

NO MOTION DISCRIMINATION

No-Motion all metal mode is when no movement of the coil is required to detect a target.

DEPTH READOUT

The depth indication dial is located at the top right of the LCD panel. Each number represents inches (2 -10 inches). The depth arrow will lock on and emit simultaneously with the target identification. Usually when the depth hits 10 inches, the target identification will emit an arrow under deep target.

5 YEAR WARRANTY

Bounty Hunter metal detectors are warranted to the original retail consumer for 5 years from date of retail purchase against defects in material and workmanship.